Acuvim-DL Power Meter with MODBUS RS485 output and load run times, plus integrated on-board LCD display, 5A input for current transformers and wide-range AC power supply input.
Built for energy and facilities professional who need a low cost single/three phase meter to monitor the run time (run hours) of electrical devices or systems. Available with LCD display or DIN Rail mount transducer (no display). All versions include MODBUS RS485 output.
The Acuvim-DL has 4 Digital Inputs, 2 Digital Outputs, 1 RS485 port with Modbus RTU protocol.
The Acuvim-L series are multifunction power meters manufactured by Accuenergy. It is the ideal choice for monitoring and controlling of power distribution system.
Acuvim-L may be used as a data gathering device for an intelligent Power Distribution System or a Plant Automation System. All monitoring data is available via digital RS485 communication port running Modbus® Protocol (excluding Acuvim AL and BL models).
The quality of the power system is important with increasing use of electronic loads such as computers, ballasts or variable frequency drives. With the Acuvim-L power analysis option, any phase current or voltage can be displayed and the harmonic content calculated. By knowing the harmonic distribution, action can be taken to prevent overheated transformers, motors, capacitors, neutral wires and nuisance breaker trips. Redistribution of the system loading can also be determined.
Metering
Monitoring
Alarms
Two (2) parameters may be set within a specified time interval. If indicated parameter is over or under its setting limit and persists over the specified time interval, the event will be recorded with time stamps and trigger the alarm DO output. The indicated parameter can be selected from any of the 35 parameters available.
Communication
RS485, industry standard Modbus® RTU protocol; (Only on models CL/DL/EL/KL)
Option the second RS485, Modbus® RTU protocol; or PROFIBUS-DP/V0 (available for the DL/EL Models)
Protocol. (just for Acuvim-DL/EL)
Display
Clear and large character LCD Screen display with white back light; Wide environmental temperature endurance.
The Acuvim II Series is available in two mounting options:
The standard model is ANSI C39.1 Standard Compliant with a small size 96x96 outline.
The DIN Rail compatible units are DIN 43700 Standard Compliant. The Acuvim L series also offers an optional Remote LCD display.
As the need to better understand power and energy consumption increases, Accuenergy continues to offer a simple and effective software compliment to our metering products. Combining their meters with the Acuview software suite allows Accuenergy to offer one of the most powerful yet cost effective metering and monitoring solutions in the market.
Q & A: Ask the Questions, share answers
Do you have questions about this product?