1-866-494-4610

Resideo S87B1016 Single-rod Direct Spark Ignition Control with 11-Second Trial and Lockout Timing

Resideo S87B1016 Single-rod Direct Spark Ignition Control with 11-Second Trial and Lockout Timing
Images for general purposes only. Actual may be different than depicted.
Resideo S87B1016 Single-rod Direct Spark Ignition Control with 11-Second Trial and Lockout Timing Honeywell S87B1016 Direct Spark Ignition Module 24 VAC No Pre-purge Honeywell S87B1016 One Rod Electrode Natural or LP Gas Direct Spark Ignition Control Honeywell S87B1016 Direct Spark Ignition Control Module

Resideo S87B1016 Single-rod Direct Spark Ignition Control with 11-Second Trial and Lockout Timing

SKU: S87B1016
Tariff HS Code: 8537109170
Rating:
Quantity Price Stock
89
Usually Ships 1 - 2 Weeks
$304.29     /ea
89

Buy in Bulk & Save

Quantity Price
5+ $279.40 /ea
0
$0.00
0
$0.00
0
S87B1016

Honeywell Resideo S87B1016 DSI Ignition Module is used to control the direct spark ignition systems of heating appliances.  The unit senses flame and starts ignition on gas fire furnaces, boilers, and other heating devices by using a single electrode.  Used with Natural or Liquid Propane gases

The S87B Models are compatible with any gas controller with 2 amps or less rating for direct spark ignition applications.  There is no pre-purge on this model and a single trial for ignition.  If it fails, there is a shutdown and 11-second lockout, followed by an 11-second ignition trial time.  This model also includes an alarm terminal.  For installation and wiring diagram instructions see the Technical Data tab, however, it is always recommended that installation and service be performed by a licensed technician.

Direct Spark Ignition Module features a thermostat reset after a lockout, ignition failure leads to lockout after one trial of ignition, it generates high voltage potential for main burner ignition and can control gas and gas ignition sequence.
 

Flame Current Signal Required 1.5uA
Thermostat Heat Anticipator Setting 0.2A plus valve current draw
Alarm Contacts 0.5A at 25 VAC
Valve Contacts 2.0A at 25 VAC
Current Rating 0.2A at 25 VAC
Frequency 60 Hz
Flame Failure Reignition Time 0.8 second maximum
Voltage 25 VAC
Approvals UL-recognized and CSA-certified
Type of Gas Natural or LP

Q & A: Ask the Questions, share answers

Do you have questions about this product?


Q: 
What is the alarm circuit used for???
Asked on Oct 16, 2023 by Robert from Bloomfield, CT. 06002
1 Answers

Have an answer? Click Here

A: 
The alarm circuit can be used to generate an output signal in the event of a "system safety lockout".  Essentially, in the event of loss of flame (the flame rod stops sensing the flame), the alarm contact can be used to send an output to actuate an alarm.  This alarm can be a light, horn, buzzer, etc.  

We strongly encourage you to have a licensed professional review your application to ensure that the use of the Honeywell S87B1016 in your unique application to ensure the module is safely installed in accordance with codes and standards mandated by your Authority Having Jurisdiction.   
Replied on Oct 27, 2023 by Ori from Industrial Stores