Illinois Float and Thermostatic Steam Traps

Series G, MG Float and Thermostatic Steam Traps are used in steam main drip and process applications to remove condensate, air, and non-condensable gases from steam systems. They feature an iron body with a straight-through design, stainless steel valve head & seat, phosphor bronze diaphragm, seamless copper float and rust preventive enamel finish. Series G, MG steam traps are water hammer resistant, and in-line serviceable. They are ideal for use in steam coils, unit heaters, drip points, heat exchangers, water heaters, absorption machines, unit ventilators, air handlers, make-up air coils, reheat coils, and jacketed kettles. Models 6G-15 to 101G-15 have a pressure range of 25" Hg to 15psi. Models 7MG-30 to 101MG-30 have a pressure range of 25" HG to 30psi. Models 6MG-50 to 101MG-50 have a pressure range of 25" HG to 50psi.

Features:

• Fail safe — In case of float failure, trap will discharge condensate and air; no unit freeze-up
• Air vent parts — accessible without disturbing piping
• Inlet baffle — breaks up water hammer; prevents damage to parts
• Snap action valve — no wire-drawing or valve chatter
• Two moving parts — no levers, hinges or pins to corrode or jam
• Straight-through connections — saves installation time, labor, space, headroom
• Stainless steel valve head and seats
• Seamless copper float — no seams to develop leaks
• Uniform operations — not affected by changes in load or pressures
• Condensate valve rotates — ensures even wear, longer valve and seat life